namachan10777.dev

記事を検索する

    Arch Linuxをインストールでセットアップしたのでメモ

    Arch Linux installation memo

    最近はずっとMacbookを使っていたが、久しぶりにArch Linuxを再設定したのでメモ。 まだ途中でやるべきことは色々残っている。

    パーティションとファイルシステム

    以下の三種類のみ。

    pathsize
    /boot1 GiB
    swap32 GiB
    /443 GiB

    Table: Partition and Filesystem

    昔は//homeを分けていたが、自分は大体データはクラウドに同期させているので/homeを消してもあまり痛くないことに気がついてからは分けてない。むしろディスク容量の配分が面倒なので統合。/varはsmall fileが多いのでraiserfsが有利という話もあったが、dockerのイメージは/varなのにRustの/targetは大体/homeにある。そもそものsmall fileの優位性以前に、/var/であまり特性が変わるとも思えないので統合。

    swapに関しては現代のハードウェアでは仮想メモリでメモリ拡張する必要はあまり無い(積極的にOOM Killしたりもする)が、swapの用途はそれだけではないので一応置いてある。このマシンは16 GiBメモリなので32 GiBの容量を確保。

    EFIに1 GiBも割く必要はないのだが、容量が圧迫されるのはなんとなく不安なので1 GiBにした。512 MiBとかでも割と余裕はある。

    ファイルシステムは今回は少し冒険してbcachefsにしてみた。機能的にはbtrfsとそこまで差はないはず。速度に関してもbtrfsよりは良いようだ。XFSには普通に負けてるらしい(XFSより速いファイルシステムはあまりない)。今回のマシンはディスク容量がやや不安なのでマウントオプションにcompression=zstd:2を付けておく。大体snappy相当なのでパフォーマンス的にはあまり問題ないはず。

    # Static information about the filesystems.
    # See fstab(5) for details.
    
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/nvme0n1p3 LABEL=ROOT
    LABEL=ROOT         	/		bcachefs  	rw,relatime,compression=zstd:2,noshard_inode_numbers	0 0
    
    # /dev/nvme0n1p1 LABEL=BOOT
    LABEL=BOOT      	/boot     	vfat      	rw,relatime,fmask=0137,dmask=0027,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro	0 2
    
    # /dev/nvme0n1p2 LABEL=SWAP
    LABEL=SWAP      	swap      	defaults  	0 0
    

    fstabはこう。ファイルシステムを作成するときにパーティションラベルを付けておくとLABEL=<LABEL>の形で指定出来る。便利なのでオススメです。

    ブートマネージャ

    systemd-bootを使った。単純だし最初からArchに入っているので楽。

    title           Arch Linux
    linux           /vmlinuz-linux
    initrd          /intel-ucode.img
    initrd          /initramfs-linux.img
    options         root=LABEL=ROOT rootflags=compression=zstd:2
    

    ルートファイルシステムで圧縮を有効化しているのでカーネルオプションでrootflags=compression=zstd:2を付けておく。 パーティション選択はファイルシステム作成時にラベルを付けておいたので楽に書ける。

    ネットワーク設定まわり

    DHCP Clientはsystemd-networkdを使用。接続自体はiwdで8021xの設定ファイルを書いて研究室のWiFiにつなぐ。 eduroamと大学内WiFiはなぜか繋がらない。研究室と同じEAP-PEAP MSCHAPV2でつながるはずだがよく分からない。後でやる。

    DNSもsystemd-resolved。設定が少し分かりづらいが、per-link DNSが本当に便利なので使っている。 複数のネットワークにつながっている場合でもinternalなドメインはinternalなDNSを使用して解決するように出来て便利。

    パスワード試行回数

    べらぼうに長いパスワードを使っているので頻繁に間違えて10分待てと言われるので少し緩める。 Arch Linuxの場合は/etc/security/faillock.confで設定する。

    deny = 5
    unlock_time = 300
    

    下のパスワード自体相当長いので多分大丈夫。

    GUI

    swayをずっと使っている。swaylockの代わりにswaylock-effectsを使っているが、 PAM認証に失敗した場合にred screenになる問題があるので swaylock-effects-gitを使う必要がある。多分1.8系になれば解決するはず。

    # Default config for sway
    #
    # Copy this to ~/.config/sway/config and edit it to your liking.
    #
    # Read `man 5 sway` for a complete reference.
    
    ### Variables
    #
    # Logo key. Use Mod1 for Alt.
    set $mod Mod4
    # Home row direction keys, like vim
    set $left h
    set $down j
    set $up k
    set $right l
    # Your preferred terminal emulator
    set $term alacritty
    # Your preferred application launcher
    # Note: pass the final command to swaymsg so that the resulting window can be opened
    # on the original workspace that the command was run on.
    set $menu wofi --show drun
    
    ### Output configuration
    #
    # Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
    output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
    #
    # Example configuration:
    #
    #   output HDMI-A-1 resolution 1920x1080 position 1920,0
    #
    # You can get the names of your outputs by running: swaymsg -t get_outputs
    
    output "eDP-1" scale 1.3
    
    ### Idle configuration
    #
    # Example configuration:
    #
    
    set $lock swaylock \
      --screenshots \
      --clock \
    	--indicator \
    	--indicator-radius 100 \
    	--indicator-thickness 7 \
    	--effect-blur 10x7 \
    	--effect-vignette 0.5:0.5 \
    	--ring-color bb00cc \
    	--key-hl-color 880033 \
    	--line-color 00000000 \
    	--inside-color 00000088 \
    	--separator-color 00000000 \
    	--grace 2 \
    	--fade-in 0.2
    
    set $laptop eDP-1
    bindswitch --reload --locked lid:on output $laptop disable
    bindswitch --reload --locked lid:off output $laptop enable
    
    exec swayidle -w \
      timeout 300 '$lock -f -c 000000' \
      timeout 600 'systemctl suspend; swaymsg "output * dpms off"' \
      resume 'swaymsg "output * dpms on"'  \
      before-sleep '$lock -f -c 000000'
    
    #
    # This will lock your screen after 300 seconds of inactivity, then turn off
    # your displays after another 300 seconds, and turn your screens back on when
    # resumed. It will also lock your screen before your computer goes to sleep.
    
    gaps inner 2
    exec dex -a
    
    ### Input configuration
    #
    # Example configuration:
    #
    #   input "2:14:SynPS/2_Synaptics_TouchPad" {
    #       dwt enabled
    #       tap enabled
    #       natural_scroll enabled
    #       middle_emulation enabled
    #   }
    #
    # You can get the names of your inputs by running: swaymsg -t get_inputs
    # Read `man 5 sway-input` for more information about this section.
    
    input "1386:18753:Wacom_HID_4941_Finger" {
      events disabled
    }
    
    input "type:touchpad" {
        tap enabled
        dwt enabled
        natural_scroll disabled
        middle_emulation enabled
    }
    
    set $display-builtin "eDP-1"
    set $display-external "DP-1"
    
    workspace 1 output $display-external $display-builtin
    workspace 2 output $display-external $display-builtin
    workspace 3 output $display-external $display-builtin
    workspace 4 output $display-external $display-builtin
    
    ### Key bindings
    #
    # Basics:
    #C
    
        bindsym $mod+Home exec bash -c "env | sort > $HOME/sway_env"
    
        # Start a terminal
        bindsym $mod+Return exec $term
    
        # Kill focused window
        bindsym $mod+Shift+q kill
    
        # Start your launcher
        bindsym $mod+d exec $menu
    
        # Lock screen
        bindsym $mod+ctrl+l exec $lock
    
        # Drag floating windows by holding down $mod and left mouse button.
        # Resize them with right mouse button + $mod.
        # Despite the name, also works for non-floating windows.
        # Change normal to inverse to use left mouse button for resizing and right
        # mouse button for dragging.
        floating_modifier $mod normal
    
        # Reload the configuration file
        bindsym $mod+Shift+c reload
    
        # Exit sway (logs you out of your Wayland session)
        bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
    #
    # Moving around:
    #
        # Move your focus around
        bindsym $mod+$left focus left
        bindsym $mod+$down focus down
        bindsym $mod+$up focus up
        bindsym $mod+$right focus right
        # Or use $mod+[up|down|left|right]
        bindsym $mod+Left focus left
        bindsym $mod+Down focus down
        bindsym $mod+Up focus up
        bindsym $mod+Right focus right
    
        # Move the focused window with the same, but add Shift
        bindsym $mod+Shift+$left move left
        bindsym $mod+Shift+$down move down
        bindsym $mod+Shift+$up move up
        bindsym $mod+Shift+$right move right
        # Ditto, with arrow keys
        bindsym $mod+Shift+Left move left
        bindsym $mod+Shift+Down move down
        bindsym $mod+Shift+Up move up
        bindsym $mod+Shift+Right move right
    #
    # Workspaces:
    #
        # Switch to workspace
        bindsym $mod+1 workspace number 1
        bindsym $mod+2 workspace number 2
        bindsym $mod+3 workspace number 3
        bindsym $mod+4 workspace number 4
        bindsym $mod+5 workspace number 5
        bindsym $mod+6 workspace number 6
        bindsym $mod+7 workspace number 7
        bindsym $mod+8 workspace number 8
        bindsym $mod+9 workspace number 9
        bindsym $mod+0 workspace number 10
        # Move focused container to workspace
        bindsym $mod+Shift+1 move container to workspace number 1
        bindsym $mod+Shift+2 move container to workspace number 2
        bindsym $mod+Shift+3 move container to workspace number 3
        bindsym $mod+Shift+4 move container to workspace number 4
        bindsym $mod+Shift+5 move container to workspace number 5
        bindsym $mod+Shift+6 move container to workspace number 6
        bindsym $mod+Shift+7 move container to workspace number 7
        bindsym $mod+Shift+8 move container to workspace number 8
        bindsym $mod+Shift+9 move container to workspace number 9
        bindsym $mod+Shift+0 move container to workspace number 10
        # Note: workspaces can have any name you want, not just numbers.
        # We just use 1-10 as the default.
    #
    # Layout stuff:
    #
        # You can "split" the current object of your focus with
        # $mod+b or $mod+v, for horizontal and vertical splits
        # respectively.
        bindsym $mod+b splith
        bindsym $mod+v splitv
    
        # Switch the current container between different layout styles
        bindsym $mod+s layout stacking
        bindsym $mod+w layout tabbed
        bindsym $mod+e layout toggle split
    
        # Make the current focus fullscreen
        bindsym $mod+f fullscreen
    
        # Toggle the current focus between tiling and floating mode
        bindsym $mod+Shift+space floating toggle
    
        # Swap focus between the tiling area and the floating area
        bindsym $mod+space focus mode_toggle
    
        # Move focus to the parent container
        bindsym $mod+a focus parent
    #
    # Scratchpad:
    #
        # Sway has a "scratchpad", which is a bag of holding for windows.
        # You can send windows there and get them back later.
    
        # Move the currently focused window to the scratchpad
        bindsym $mod+Shift+minus move scratchpad
    
        # Show the next scratchpad window or hide the focused scratchpad window.
        # If there are multiple scratchpad windows, this command cycles through them.
        bindsym $mod+minus scratchpad show
    #
    # Resizing containers:
    #
    mode "resize" {
        # left will shrink the containers width
        # right will grow the containers width
        # up will shrink the containers height
        # down will grow the containers height
        bindsym $left resize shrink width 10px
        bindsym $down resize grow height 10px
        bindsym $up resize shrink height 10px
        bindsym $right resize grow width 10px
    
        # Ditto, with arrow keys
        bindsym Left resize shrink width 10px
        bindsym Down resize grow height 10px
        bindsym Up resize shrink height 10px
        bindsym Right resize grow width 10px
    
        # Return to default mode
        bindsym Return mode "default"
        bindsym Escape mode "default"
    }
    bindsym $mod+r mode "resize"
    gaps inner 10
    
    #
    # Status Bar:
    #
    # Read `man 5 sway-bar` for more information about this section.
    
    bar {
        swaybar_command waybar
        position top
    
        # When the status_command prints a new line to stdout, swaybar updates.
        # The default just shows the current date and time.
        status_command while date +'%Y-%m-%d %l:%M:%S %p'; do sleep 1; done
    
        colors {
            statusline #ffffff
            background #323232
            inactive_workspace #32323200 #32323200 #5c5c5c
        }
    }
    
    xwayland enable
    exec systemctl --user start sway.target
    
    include /etc/sway/config.d/*
    

    fcitx5などのIMEの起動はswayの設定内でexecを使うのが一般的だが、なんとなくデーモンは全てsystemdに集約したい(再起動とか楽)ので、 ~/.config/systemd/user/fcitx5.serviceを作りsystemd userで起動する。

    fcitx5.service
    [Unit]
    Description=Fcitx5 input method
    After=graphical.target
    
    [Service]
    Type=simple
    StandardError=journal
    ExecStart=/usr/lib/fcitx5-wayland-launcher
    Restart=on-failure
    Environment=GTK_IM_MODULE=fcitx
    Environment=QT_IM_MODULE=fcitx
    Environment=XMODIFIERS=@im=fcitx
    
    [Install]
    WantedBy=sway.target
    

    WantedByの部分を普通にdefault.targetにするとswayが起動する前にfcitxが起動し、Waylandに接続出来ず死ぬのでユーザレベル独自ターゲットを設定しておく。 このターゲットをswayの設定内でsystemde start --user swya.targetとしてやると正しく起動する。 が、fcitx5が何故か頻繁に死ぬ。もう少しトラブルシュートしたほうが良さそう。